Maintenance And Cleaning; Cleaning; Maintenance Intervals - FLORABEST FKS 2200 E3 Originalbetriebsanleitung

GB
cutting line is at least 1/10 of the
trunk diameter. The part of the
log not sawed through is desig-
nated as a break dimension.
Insert a felling wedge or a crow-
R
bar into the back cut, as soon as
the depth of cut permits this, in
order to prevent a jamming of the
chain bar.
5. If the trunk diameter is larger than
S
the length of the chain bar, make
two cuts.
For safety reasons, we ad-
vise inexperienced users not
to fell any logs with a rail
length which is smaller than
the trunk diameter.
6. After carrying out of the back cut,
the tree falls by itself or with the
aid of the felling wedge or crow-
bar.
As soon as the tree begins to
fall, pull out the saw from the
section, stop the motor, place
the electric chainsaw down
and leave the workplace us-
ing the withdrawal path.

Maintenance and cleaning

Basically, carry out mainte-
nance and cleaning works
with switched-off motor and
power plug removed. Danger
of injury!
Leave any maintenance and
servicing work not covered
by this manual to our Ser-
vice-Center. Use only original
spare parts.
20
IB-270730-FKS_2200_E3-RO-BG-GR-03112015-rev03-ts.indb 20
Allow the machine to cool
down before all maintenance
and cleaning works. Danger
of burn injuries!

Cleaning

• Clean the machine thoroughly after
every use. In this way, you extend the
life of the machine and avoid acci-
dents.
• Keep the gripping handles free of pet-
rol, oil or grease. Clean the gripping
handles, where appropriate, with a
moist cloth soaked in soap. Use no sol-
vents or petrol for cleaning!
• Clean the saw chain after every use.
Use a paint brush or wipe for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.
• When cleaning, also remove the chain
wheel cover (15) so that this area can
be cleaned as well.
• Clean the chain bar (Guide) (4).
• Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning.
• Clean the oil passages of the chain
bar (27), in order to guarantee a trou-
ble-free, automatic oiling of the saw
chain during operation.

Maintenance intervals

Regularly carry out the maintenance opera-
tions listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.
04.11.15 12:47