Maintenance And Cleaning; Cleaning; Maintenance Intervals; Maintenance Interval Table - FLORABEST FKS 2200 B1 Betriebsanleitung

is smaller than the trunk diam-
eter.
6. After carrying out of the back
cut, the tree falls by itself or with
the aid of the felling wedge or
crowbar.
As soon as the tree begins to
fall, pull out the saw from the
section, stop the motor, place the
electric chainsaw down and leave
the workplace using the with-
drawal path.

Maintenance and cleaning

Basically, carry out mainte-
nance and cleaning works with
switched-off motor and power
plug removed. Danger of injury!
Leave any maintenance and
servicing work not covered by
this manual to our Service-Cent-
er (see P. 153 for the address).
Use only original spare parts.
Allow the machine to cool down
before all maintenance and
cleaning works. Danger of burn
injuries!

Maintenance Interval Table

Machine part
Components of the
chain brake
Sprocket chain wheel
Saw chain (5)
Guide bar (4)
Action
Check, replace if required
Check, replace if required
Check oil, regrind or re-
place if required
Check, turn round, clean
and oil

Cleaning

• Clean the machine thoroughly after
every use. In this way, you extend
the life of the machine and avoid ac-
cidents.
• Keep the gripping handles free of
petrol, oil or grease. Clean the grip-
ping handles, where appropriate, with
a moist cloth soaked in soap. Use no
solvents or petrol for cleaning!
• Clean the saw chain after every use.
Use a paint brush or wipe for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.
• Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning.

Maintenance intervals

Regularly carry out the maintenance oper-
ations listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.
Before
every use




GB
After 10 hours
of operation

19