Safety Notices For Milling Cutters - Parkside POF 1200 C2 Originalbetriebsanleitung

GB MT
tools are dangerous in the hands of un-
trained users.
• Maintain power tools. Check for
misalignment or binding of mov-
ing parts, breakage of parts and
any other condition that may af-
fect the power tool's operation.
If damaged, have the power tool
repaired before use. Many acci-
dents are caused by poorly maintained
power tools.
• Keep cutting tools sharp and
clean. Properly maintained cutting tools
with sharp cutting edges are less Iikely to
bind and are easier to control.
• Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
• Carefully inspect the area to be cut and
remove all wires or other foreign bodies.
Service
• Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety of
the power tool is maintained.
Safety notices for milling
cutters
Warning! Milling can result in
the formation of dusts hazardous to
health (e.g. arising from materials
with paints containing lead, materi-
als containing asbestos or some
wood types), which can pose a risk
to the operator or persons nearby.
46
Make sure that the workplace is
well ventilated. Always wear safety
goggles and respiratory protection.
Attach a dust extraction system.
• Hold the power tool on the insu-
lated handle surfaces, as the cut-
ter might hit its own power cable.
Contact with a live wire can also cause
a charge in metal parts of the appliance
and result in an electric shock.
• Fasten and secure the workpiece
by means of clamps or with
another method on a stable un-
derground. If you hold the workpiece
only with your hand or against your own
body, it will stay instable and this can
lead to a loss of control.
• The permissible rotation speed of
the attachment tools must be at
least as high as the highest rota-
tion speed indicated on the pow-
er tool. Accessories that run faster than
the permissible speed can be destroyed.
• Cutters and other accessories
must be exactly matching the
tool holder (collet chuck) of your
power tool. Attachment tools that are
not exactly matching the tool holder of
the power tool rotate unevenly, vibrate
very strongly and can ultimately lead to
a loss of control.
• Ensure that the cutter is assem-
bled correctly. A cutter that is not as-
sembled correctly can break during the
milling or be ejected and present a risk
of injury.
• Move the power tool against the
workpiece only when it is turned
on. Otherwise, there is a risk of kick-
back if the attachment tools jam in the
workpiece.
• Do not put your hands in the cut-
ting area and neither on the cut-