Symbols On The Appliance; General Safety Directions For Power Tools - Parkside POF 1200 C2 Originalbetriebsanleitung

GB MT

Symbols on the appliance

Attention!
Pull out mains plug immediately, if
the mains cable is damaged, entan-
gled or severed.
Always remove the mains plug be-
fore working on the device.
Read the manual.
Wear ear protection.
Wear eye protection.
Wear breathing protection.
Do not wear gloves while milling.
Electrical appliances must not be
disposed of with the domestic
waste.
Direction of rotation of the milling
cutter
Protection class II
(Double insulation)
General Safety Directions for
Power Tools
WARNING! Read all safety
directions and instructions.
Omissions in the compliance with
safety directions and instructions
can cause electrical shock, fire
and/or severe injuries.
Retain all safety directions and in-
structions for future use.
44
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
Work area safety
• Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
• Do not operate power tools in ex-
plosive atmospheres, such as in
the presence of flammable Iiquids,
gases or dust. Power tools create
sparks which may ignite the dust or fumes.
• Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control.
Electrical safety
• Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of elec-
tric shock
• Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and re-
frigerators. There is an increased risk
of electric shock if your body is earthed
or grounded.
• Do not expose power tools to
rain or wet conditions. Water enter-
ing a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the risk of
electric shock.