Residual Risks; Initial Operation; Inserting/Changing Cutters - Parkside POF 1200 C2 Originalbetriebsanleitung

ter. Hold the additional handle
or the motor housing with your
other hand. When holding the milling
cutter with both hands, they cannot be
injured by the cutter.
• Never mill over metal objects, nails
or screws. The milling cutter can be dam-
aged and lead to increased vibrations.
• Use suitable detectors in order to
find hidden supply lines or ask
the local utility company. Contact
with electrical cables can lead to electric
shock and fire, contact with a gas pipe
can result in an explosion. Damage to
a water pipe can lead to property dam-
aged and electric shock.
• Do not use any blunt or damaged
tools. Blunt or damaged tools can
cause uncontrollable situations.
• Hold the power tool tightly with
both hands while working and en-
sure a secure footing. The power tool
is guided more securely with both hands.
• Wait until the power tool has
stopped before placing it down.
The attachment tools can jam and lead
to a loss of control over the power tool.
• Avoid contact with the tool or
the workpiece immediately after
processing. The parts may be hot and
cause burn injuries.
• Use only milling cutters which have the
correct shank diameter and are suitable
for the speed of the power tool.

Residual risks

Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Injuries caused by moving parts;
b) Ear damage if working without ear
protection;
c) Lung damage, if suitable respiratory
protection is not worn;
d) Eye injuries if no suitable eye protec-
tion is worn.
e) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.

Initial operation

Pull out the power plug before car-
rying out any work on the equip-
ment. There is a risk of electrocution
or of injury from moving parts.
Before you turn on the machine, you must
- insert the desired cutter,
- connect the dust suction,
- adjust the cutting depth,
- mount the parallel stop if necessary,
- clamp in the workpiece.

Inserting/changing cutters

To insert and replace cutters, wear
protective gloves to prevent cuts
and burns.
GB MT
47