Non-Dmx Modes - Futurelight CL-48 Led-Cluster Bedienungsanleitung

Non-DMX modes

Table 1: Set operating mode via DIP-switches
Operating mode
No function
Sound control -
Stand Alone
RGB Intensity
(see table 2)
Internal program 1
Internal program 2
Internal program 3
Internal program 4
Internal program 5
Internal program 6
Internal program 7
Internal program 8
Table 2: RGB intensity
To adjust the RGB colour intensity, first set DIP-switches 11 to ON, 10 and 7 to OFF.
Adjust red via DIP-switch 1 and 2, green via DIP-switch 3 and 4, and blue via DIP-switches 5 and 6.
LED
DIP 1
intensity
0 % OFF
25 % ON
50 % OFF
100 % ON
Tabelle 3: Speed of internal programs
To adjust speed of internal programs, first set DIP-switches 11 and 7 to ON and 10 to OFF.
Speed can then be adjusted via DIP-switches 8 and 9.
Speed
Slow (1.1 s between scenes)
Medium (0.6 s between scenes)
Fast (0.2 s between scenes)
Very fast (0.1 s between scenes)
Please note: If the device is connected to a DMX-controller, it can not be controlled via DIP-switches. If the
DMX-connection is cut off, the device remains in DMX-mode.
If you wish to change from one operating mode into another, you have to unplug the device from the
mains and plug it in again.
DIP DIP DIP
11 10 9
OFF OFF N/A
OFF ON N/A
ON OFF N/A
ON OFF speed
ON OFF speed
ON OFF speed
ON OFF speed
ON OFF speed
ON OFF speed
ON OFF speed
ON OFF speed
Red
DIP 2 DIP 3
OFF OFF
OFF ON
ON OFF
ON ON
DIP DIP DIP
8 7 6
N/A N/A N/A
N/A N/A N/A
N/A OFF blue
speed ON OFF
speed ON OFF
speed ON OFF
speed ON OFF
speed ON OFF
speed ON ON
speed ON OFF
speed ON OFF
Green
DIP 4
OFF
OFF
ON
ON
DIP 8
OFF
ON
OFF
ON
25/55
DIP DIP DIP
5 4 3
N/A N/A N/A
N/A N/A N/A
blue green green
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF ON OFF
ON OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
Blue
DIP 5 DIP 6
OFF OFF
ON OFF
OFF ON
ON ON
DIP 9
OFF
OFF
ON
ON
51841355_V_1_0.DOC
DIP DIP
2 1
N/A N/A
N/A N/A
red red
OFF ON
ON OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
ON ON
OFF ON