Bosch FWA 4630 Erstinbetriebnahme Seite 11

3.4 FWA specified data
i
The dongle must be plugged in at the parallel port
(LPT1) of the PC unit.
1. Terminate all other programs.
Insert the FWA specified data CD/DVD in the drive of
2.
your computer.
?
The installation program starts up automatically.
i
If installation is not started automatically, start
the process as follows:
Open the "Execute" input box (select "START >>
ExECuTE..." in the task bar).
Enter D:\autorunexec.exe
with <OK>.
3. Select the < Setup + update> button.
?
Installation is started.
4. During installation it is possible to choose whether
to continue using the existing licences or to use new
licences.
<Yes> Select new licence file.
<No> Continue using existing licence.
5. If the < Yes> option is chosen, the licence file
(Lxnnnnnnn_nnnnn.lic) must be selected:
Insert the licence floppy disk and select <Browse>.
Select drive a:\ and mark the licence file.
6. Confirm with < OK> and continue with installation.
Robert Bosch GmbH
7. On completion of the installation process, remove
the licence floppy disk.
Select <
8.
"
The PC unit is re-started.
i
The installation program checks all the specified
data records contained on the CD/DVD for a valid
licence and displays an HTML protocol with the used
and existing licences during installation. In addition
to the serial number of your unit and the start and
end times, a log is produced of the installation and
licence of each data record.
and confirm
?
Data record in
?
Data record in
i
This file is saved in the directory C:\Documents and
settings\User\Local settings\Temp. In the event of
error messages, this file should be submitted to our
Service department.
3.5
3.5.1
i
Printer commissioning is described in the separate
instructions for the printer.
3.5.2
i
Only install the printer driver. Installation of the
additional software could have a negative effect on
operation of the network connections.
Switch-on | FWA 4360 | 11
Finish> and <OK>
green: Valid licence found.
red: No valid licence found.
Printer
Commissioning
Installation
1 690 706 006
en
| |
2009-05-19