Setting The Working Temperature - Parkside PLSD 48 A1 Originalbetriebsanleitung

Setting the working temperature

♦ Press the + / — buttons
in steps of 10°C .
The current target temperature
NOTE
► Press the + / — buttons
ture continuously in steps of 10°C .
Release the + / — buttons
ture is reached .
■ If the + / — buttons
temperature
Set the programmed temperature
In addition to the temperature setting using the + / — buttons
there are 3 preset temperatures: 200°C / 300°C / 400°C .
♦ Press preset temperature
preset temperature .
The preset temperature is shown with an arrow on the display
│ GB │ IE
■ 28
/
/
/
/ are not pressed again, the heating-up
is shown on the LC display
or
to set the working temperature
is shown on the LC display
to change the working tempera-
when the desired tempera-
after 3 seconds .
or to adjust the desired
.
/ ,
.
PLSD 48 A1