Abicor Binzel ABIPLAS WELD CT Betriebsanleitung Seite 37

®
ABIPLAS WELD CT
6.3 Mounting the plasma segment holder
1 Fastener
2
Segment holder
Fig. 5 Mounting the plasma segment holder
BAL.0128 • 2018-02-05
1
4
3
3 10x cylinder head screws M5 × 18
In each of the five adjustable positions (offset by 15°), only four bores are
congruent. Three for the cylinder head screws and one marked for the dowel
pin. Please observe the enclosed instruction leaflet BEI.0063.
1 Move the bracket (1) and segment holder (2) into position and secure with
the cylinder bolt (4).
2 Use the cylinder head screws (3) to connect the segment holder (2) and
the bracket (1).
6 Putting into operation
2
4 Cylinder bolt 5 m6 × 20
EN - 13