NEC MultiSync LCD1510V Bedienerhandbuch Seite 36

Controls
Information
Indicates the current display resolution, frequency setting
and type of Sync signal of the monitor.
NOTE: Mode Change should only be used if a resolution is
not recognized by the monitor. The user can change to the
appropriate resolution by selecting the Mode information
and selecting (increase or decrease) the corresponding option.
NOTE: If the
highlighted, then Sync Type is switched between Separate
Sync and Sync On Green.
OSM LOCK OUT
The OSM LOCK OUT control completely locks out access
to all OSM control functions. When attempting to activate
OSM controls while in the LOCK OUT mode, a screen will
appear indicating that OSM controls are locked out.
• To enter the LOCK OUT mode, simultaneously press
the PROCEED and
will appear.
• To activate the LOCK OUT function, simultaneously
press and hold down the PROCEED and button. The
OSM window will disappear within seconds and the
LOCK OUT function will be activated.
• To deactivate the LOCK OUT mode, simultaneously
press the PROCEED and
or button is pressed while TYPE is
button. The LOCK OUT window
button.
E - 21