NEC MultiSync LCD1510V Bedienerhandbuch Seite 35

E - 20
Image Adjust Controls
H. SIZE
Adjusts the horizontal size by increasing or decreasing the
this setting.
FINE
Improves focus, clarity and image stability by increasing or
decreasing this setting.
NOTE: The Image Adjust Fine control must be used to
complete the setup of your MultiSync LCD
MultiSync LCD
Automatically adjusts the H. Size or Fine settings.
MultiSync LCD
Automatically adjusts the H. Size settings.
Colour Control System
Five colour presets select the desired colour setting. Each
colour setting is adjusted at the factory.
R,G,B: Increases or decreases Red, Green or Blue colour
depending upon which is selected. The change in colour will
appear on screen and the direction (increase or decrease)
will be shown by the bars.
Tools
OSM H. POS.
OSM V. POS.
You can choose where you would like the OSM control
window to appear on your screen. Selecting OSM Location
allows you to manually adjust the position of the OSM
control menu left, right, up or down.
ALL RESET
Selecting ALL RESET allows you to reset all OSM control
settings back to the factory settings. Individual settings can
be reset by highlighting the control to be used and pressing
the RESET button.
, MultiSync LCD
1510
monitor only
2010
Controls
monitor.
2010
monitor only
1510V