inshape 17527 Gebrauchsanweisung Seite 40

Refi ll the lubricant (silicone oil) using the
hole on the right side of the motor cover.
We recommend inspecting the treadmill
regularly, and top up the oil at the following
intervals:
Light use (less than 3 hours per week):
every 5 months
Medium use (4-7 hours per week):
every 2 months
Heavy use (more than 8 hours per week):
every month
If the belt runs unevenly
During operation, the belt may run to the
right or left if one of your legs is stronger
than the other. Always try to run in the
middle of the belt.
If the belt drifts to the left, loosen the left
adjustment screw and/or tighten the right
adjustment screw.
40
If the belt drifts to the right, loosen the right
adjustment screw and/or tighten the left
adjustment screw.
The belt must run at a speed of 6 km/h while
you make this adjustment.
You should only turn the screws a quarter
of a revolution at a time. Do not tighten the
screws too much, as this may damage the
treadmill.
If the belt slips
If the belt is too loose, it may slip on the
rollers or it may stop when a person steps
on it.
Turn the adjustment screw by the motor
clockwise using an Allen key.
Do not tighten the screw too much, as this
may damage the treadmill.