Cleaning And Maintenance - inshape 17527 Gebrauchsanweisung

Folding
Lift the treadmill up until the pneumatic
cylinder locks in place with an audible click.
Unfolding
Hold the treadmill, release the lock on
the cylinder and pull the treadmill in the
direction of the arrow. The treadmill slowly
folds down.

Cleaning and maintenance

WARNING!
Make sure that NO liquids get into the
machine or electronic parts, as this may
damage the product.
Remove the cord before cleaning or
maintaining the treadmill. Maintenance
should only be performed by authorised
service technicians, unless otherwise
indicated by the manufacturer. Failure
to comply with these instructions will
automatically void the warranty.
Do not expose to high humidity or direct
sunlight.
Cleaning
Regular cleaning will increase the treadmill's
service life.
Dust the treadmill regularly Make sure to
clean the free edges on each side of the
treadmill and the edges of the frame. This
prevents dust and dirt building up under
the treadmill. Use clean shoes. The top of the
treadmill can be cleaned with a well-wrung
cloth and a small quantity of washing-up
liquid. Do not allow water to get into the
treadmill frame or onto the underside of the
treadmill.
WARNING!
Always unplug the treadmill before removing
the cover over the motor. Remove the cover
from over the motor and vacuum the motor
once a year.
The treadmill's interior and the plate it runs
on are lubricated from the factory and
require minimal maintenance.
The friction between the treadmill and the
plate it runs on is very important for the
treadmill's function.
The treadmill is self-lubricating, so you do
not need to touch the belt or any other parts
of the treadmill for lubrication.
GB
39