Assembly and preparation
Step 1
Attach the vertical struts at the front of the
frame using 2 x M8×40 and 2 x M8×60 screws
and washers on each side.
Step 2
Attach the cover plates to the front struts at
the bottom using 2 x ST4×16 screws on each
side.
Step 3
Raise the computer panel on the vertical
struts and connect the cables to the
computer.
Secure the computer panel using 2 x M8×20
screws and washers on each side.
The treadmill is now assembled and ready
for use.
36
A
B
F
Main components
A. Computer
B. Dead man's switch
C. Pulse sensor
D. Lubrication nozzle
E. Belt
F. Transport wheels
C
C
D
E