Jumper Settings - Exsys EX-1189HMVS-2 Anleitung

English
3. Layout, Connections & Jumper Settings

3.3 Jumper Settings

The EX-1189HMVS-2 will be delivered with the setting Bus-Power.
possibility to cut the power at the data line.
screws on both sides. Then you must set the jumper JP1 from ENA (Enable) to DIS
(Disable). See the following picture.
JP1
© Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
ENA
DIS
12
For this you open the case with the four
EX-1189HMVS-2
But you have the