FLASH MODES
Selecting the mode
1. Select
in the menu,
Flash Settings
2. then
Flash Exp. Compensation
3. configure the desired setting on the scale of the corresponding
sub-menu
Automatic flash activation -
This is the default mode. The flash is activated automatically
whenever longer exposure times could lead to blurred pictures in
poor lighting conditions.
in the sub-menu, and
Manual flash activation -
For backlit pictures where your main subject does not fill the entire
frame and is in shadow, or in situations where you want to mitigate
high contrasts, e.g. due to direct sunlight (fill flash).
As long as this mode is activated, the flash unit will be activated for
every picture, irrespective of the prevailing lighting conditions.
EN
195