Autofocus Metering Methods; Multi-Field Metering; 1-Field Metering; Button Control - Leica Q Anleitung

EN

AUTOFOCUS METERING METHODS

For optimum adjustment of the AF system to different subjects,
situations, and picture composition ideas, you can choose between
six AF metering methods on the Leica Q:
Setting the function
1. Select in the menu,
Focus
2. then in the sub-menu, and
AF Mode
3. select the desired setting in the corresponding sub-menu

Multi-field metering

This metering method captures the subject with a total of 49 fields,
thus offering maximum snapshot success.
• Successful focusing for the parts of the subject in question is
indicated by the appearance of a green frame. If, on the other
hand, it is not possible to focus, then a red frame will appear at
the center of the screen.
176

1-field metering

This metering method records only the parts of the subject in the
center of the monitor image. Thanks to the small metering range
for 1-field metering, you can concentrate on tiny details of the
subject.
With this metering method you can move the AF frame to any point
on the monitor image, e.g. to make it easier to use for off-center
subjects: This can happen in two ways.

Button control

Use the direction pad to move the AF frame to the desired position
You can return the frame to the central position at any time:
Double tap the monitor at any location
Touch control
1. Touch the metering frame until red triangles appear
2. Drag the metering frame to the desired position
Place the metering frame in the middle:
Double tap the monitor at any location
Note:
If the camera is turned off and then on again, the metering field will
always start out in the middle.