Viewing Picture Series - Leica Q Anleitung

EN

VIEWING PICTURE SERIES

Picture series taken using series picture and bracketing, but
particularly those taken with the time lapse function, may contain
quite a few individual pictures. If all of these pictures were shown,
it would become difficult to quickly find other individual pictures.
The Leica Q offers a function that allows such picture series to be
displayed initially with a single "representative" picture.
Picture series are denoted by
denoted by .
Setting the function
1. Select
Play Mode Setup
2. then
Group display mode
3. select the desired setting in the corresponding sub-menu
• When is selected, then "representative" pictures will be
On
shown, with
Off
series will be shown.
206
and time lapse picture series are
in the menu,
in the sub-menu, and
, all pictures from the respective picture
When is selected, the pictures in a series will be combined in a
On
group. A single "representative" picture will be shown for each of
these groups, meaning that other pictures in the series cannot be
opened. When is selected, however, it will be possible to scroll
Off
through all pictures in the respective series. Within each group, the
pictures are numbered from 1 to x.
Regardless of the menu setting
setting, you can switch between these two options at any time
while in review mode.
Press up or down on the direction pad
• and indicate that the function is turned on and
PLAY
indicates that the function is off.
, and without changing this
On