Removing/Affixing The Lens Hood - Leica Q Anleitung

• For the same reason, it is recommended that the card is always
stored in an antistatic case.
• It cannot be guaranteed that the camera will function properly
when WLAN cards are used.
• SD, SDHC, and SDXC memory cards have a write protection
switch, which can be used to prevent unintentional storage and
deletion of pictures. This switch takes the form of a slider on the
non-beveled side of the card; in the
lower position, marked LOCK, the data is protected.
Caution:
Keep batteries out of the reach of children.
Swallowing memory cards can cause suff ocation.
Close the battery compartment/memory card slot door
Removing/affi xing the lens hood
Affi xing
1. Twist off the protective ring thread by turning it counterclock-
wise
2. Twist on the lens hood by turning it clockwise until it stops
Turn it in the opposite direction to remove.
Note:
Be sure to keep the protective ring thread in a place where it won't
get lost.
EN
149