Before Initial Use Operation; Cleaning Without The Insert - Silvercrest SUR 46 A1 Bedienungs- Und Sicherheitshinweise

j
I nsert the mains plug
(180 seconds) appears in the display
m
I mportant! Ensure that the mains voltage is 220 -240 V! (See the
type plate on the underside of the device). The device might
otherwise be damaged.
Operation
Q
Important! Fittings, stickers and decorations that are loosely at-
tached to objects, as well as other loose parts, e.g. screws on / in
spectacles, may become detached during the cleaning process.
You should therefore clean such items not more than once a month.
Note: The On-switch "ON"
control the time interval of the timer or the cleaning process. The actual
switching on and off of the device is controlled by the mains plug

Cleaning without the Insert

Q
j
E nsure that the device is disconnected from the mains supply.
j
O pen the lid
j
P lace the object to be cleaned into the stainless steel tank
j
T hen fill the stainless steel tank
j
T he liquid must cover the object that is to be cleaned, but must not
exceed the mark indicating the maximum filling height.
j
I f the stainless steel tank
device immediately until dry.
m
I mportant! Never use the ultrasonic cleaning device without
water as the device may be damaged!
Before Initial Use / Operation
into a power socket. The number
12
and the Off-switch "OFF"
1
manually.
5
overflows, wipe off the outside of the
7
2 as standard.
with normal tap water.
7
180
3 Min
simply
3
.
12
.
7
GB/IE 15