Vision TC-MATRIX Bedienungsanleitung Seite 9

SETUP – OVER NETWORK
This product uses Multicasting which is what allows one transmitter to send to many receivers.
Multicasting changes the way a network behaves.
VERY IMPORTANT: To use this product IGMP snooping MUST be activated on the network
switch. This is what allows multicasting. IGMP snooping can only be activated on a "layer-3"
managed switch.
Consider Netgear's M4300-28 (24 port)
Applications.
1. TURN IGMP SNOOPING ON You must use a managed switch. The network administrator
needs to go to the switch settings page in their browser and activate it.
or M4300-52 (48 port) as they are pre-configured for AV
TC-MATRIX_manual_en.doc
9