App Control - Vision TC-MATRIX Bedienungsanleitung

APP CONTROL

A free generic app called
Google's Play store. The app can be used for switching and renaming each end point.
1. INSTALL APP
2. CONNECT PHONE OR TABLET TO WIFI The wifi router must be on the same network as
the devices.
3. RUN APP then press SCAN to find Tx and Rx on network. They will automatically populate.
If they do not you are not on the same network.
MATRIX CONTROL LITE is available from the Apple app store and
Drag and Drop
to change "CONNECTED TX" of
RX1 to TX10
To rename click here
12
TC-MATRIX_manual_en.doc