Vision TC-MATRIX Bedienungsanleitung Seite 14

2. CREATE "SCENES" OR "MODES" If uses want to switch more than one device at a time
they can use modes.
a. Create a scene and save it.
b. Create another scenario and save it.
c. Switch between the two.
NOTE: If devices cannot be found when you click SCAN check that firewalls and VPNs are
disabled. The computer's IP address must be in the same range as the devices:
To change it in Windows 10 press the windows key and type: Network Connections
Right click and select Properties
192.168.1.xxx
14
TC-MATRIX_manual_en.doc