Connecting The Power Cord - Yamaha M-5000 Bedienungsanleitung

Connecting the power cord

After all connections are complete, make sure that the
STANDBY/ON/OFF (Power) switch is turned off, then
plug the power cord into the AC IN connector of the unit,
and then plug the power cord into the AC outlet.
AC IN
Supplied
power cord
WARNING
• If you notice any of the following abnormal conditions,
turn off the power to the unit immediately, and
disconnect the power plug from the AC outlet .
- The power cord or plug is damaged .
- The unit is emitting odor, strange noise, or smoke .
- Liquid has been spilled or objects have fallen into the
unit .
- Sound is muted all of a sudden during the operation .
- The unit is cracked or damaged .
Otherwise, continued use of the unit might lead to
electric shock, fire, or malfunction . Contact your nearest
Yamaha dealer or service center for check-up or repair .
• Do not touch the power cord or plug during lightning
storms . Otherwise, an electric shock might be caused .
• Be sure to use a power outlet with the power voltage
labeled on the unit . If the unit is plugged into an outlet
of an inappropriate voltage, fire, electric shock, or
malfunction might be caused .
• Use only the supplied power cord . Do not use the
supplied power cord for other devices .
Otherwise, fire, burning, or malfunction might be caused .
• Plug the unit into an AC outlet that is clearly visible and
easily reached, so that you can unplug the unit easily and
quickly from the AC outlet in case of emergency .
Even when the power switch is turned off, a minimal
amount of electric current is still flowing to the unit,
unless you unplug the unit from the AC outlet .
• If a lightning storm is approaching, turn off the power
to the unit immediately, and disconnect the power plug
from the AC outlet .
Otherwise, fire or malfunction might be caused .
• If you plan not to use the unit for an extended period
of time, be sure to unplug the power cord from the AC
outlet .
Otherwise, fire or malfunction might be caused .
24
M-5000
Rear panel
To AC outlet
CAUTION
• Do not use an AC outlet that is so loose that the plug
does not stay firmly in place . Otherwise, fire, electric
shock, or burning might be caused .
• When disconnecting the power cord from the AC outlet,
grasp the plug; do not pull the cord . Otherwise, the
power cord may be damaged, causing an electric shock
or fire .
• Insert the power plug into the AC outlet all the way
firmly . If the plug is not inserted completely, use of the
unit might cause an electric shock . Or, dust might build
up on the plug, causing fire or burning .
NOTICE
If you plan not to use the unit for an extended period of
time, be sure to unplug the power cord from the AC outlet .
Even when the STANDBY/ON/OFF (Power) switch is turned
off (the power indicator is dark), a minimal amount of
electric current is still flowing to the unit .