Connecting The Power Cable - Yamaha A-S500 Bedienungsanleitung

Connecting the power cable

POWER
MANAGEMENT
■ POWER MANAGEMENT switch
Enables or disables the automatic power down function.
When the automatic power down function is enabled, this
unit will automatically switch to standby mode if no
operations are performed for 8 hours.
■ VOLTAGE SELECTOR switch
(Taiwan and Central/South America
models only)
The VOLTAGE SELECTOR switch on the rear panel of
this unit must be set for your local main voltage BEFORE
plugging the power cable into the wall outlet.
Improper setting of the VOLTAGE SELECTOR switch
may cause damage to this unit and create a potential fire
hazard.
Select the switch position (left or right) according to your
local voltage using a straight slot screwdriver. Voltages
are AC 110-120/220-240 V, 50/60 Hz.
VOLTAGE
SELECTOR
■ Connecting the power cable
Plug the power cable into the wall outlet after all other
connections are complete.
(Taiwan and Central/South America models)
CONNECTIONS
To the wall outlet with
the power cable
7
En