Maico PP 45 O Installations- Und Inbetriebnahmeanleitung Seite 65

Before selection of "5. PP 45 RC lear-
i
ning mode", it is necessary to define
the PP45 RC devices amongst them
selves as master/slave.
PP45 RC devices only function in pairs
i
and only wish master/slave assignment.
Parameter
Deactivate learning-in
Manual EEP input
Change name
Unlearn units
Radio components which can be learned-in
You can learn-in up to 8 connected EnOcean
components. PP 45 radio components must
support the EEP protocol. Radio components
with the same EEP no. can be combined with
the PP 45 system.
Radio components which can
be learned-in
EasySens radio switch,
4-channel wall transmitter
Humidity/temperature sensor
CO /temperature sensor
2
VOC/temperature sensor*
ViAct (Opus Bridge) 1-channel
recessed-mounted switch
* no EnOcean VOC sensor currently available.
Set value
 Following table
bathroom, living room
etc.
All released EnOcean
components are un-
learned
EEP
F6-02-01
A5-04-01
A5-09-08
A5-09-05
D2-01-01
14 RLS 45 K – commissioning software | UK
Complete commissioning/maintenance
To save a commissioning or maintenance
protocol. This includes project data, infor-
mation regarding the planner, installer and
customers as well as notes.
The unit date, all settings and a fault logbook
are automatically stored.
A print file is generated so that you can save
or print it.
Input/read out data set
To read out or input the device configurations.
This can, for example, be sent to the manu-
facture in case servicing is needed. Externally
created configuration data can be input.
65