Specialist Installer Qualifications; Intended Use - Maico PP 45 O Installations- Und Inbetriebnahmeanleitung

8.7 Operation with an odd number of units .50
8.8 RLS 45 K additional functions on
230 V input .........................................51
9 Commissioning .....................................53
9.1 Commissioning pre-requirements .......53
10 Radio-controlled operation with
PP 45 units (EnOcean) .........................53
10.1 Meaning of the LEDs on PP 45 RC/
PPB 30 RC .........................................54
10.2 Radio components which can be
learned-in (EEP) .................................54
10.3 Learn-in PP 45 Act EnOcean wireless
actuator ...............................................54
11 USB port ................................................55
12 ModBus connection .............................55
13 Service mode ........................................55
14 RLS 45 K - commissioning software ...56
14.1 System requirements ..........................56
14.2 Connecting notebook, loading software .56
14.3 Commissioning software: operation ...56
14.4 Menu query .........................................57
14.5 Menu settings - operator ..................59
14.6 Menu settings - Installer ...................61
15 Faults/rectification ................................66
16 Spare parts ............................................66
17 Accessories...........................................66
18 Decommissioning/dismantling ............66
19 Environmentally responsible disposal ... 67

1 Specialist installer qualifications

Shell measures may only be undertaken by a
trained specialist. Only a trained electrician
is permitted to undertake final mounting and
work on the electrics. You are considered a
trained electrician if your specialist training
and experience
● means that you are familiar with the relevant
standards and guidelines
● enables you to correctly and safely under-
take the electrical connections in accord-
ance with the wiring diagram provided and
● enables you to recognise and avoid risks
and hazards associated with electricity.
1 Specialist installer qualifications | UK
After successful installation and commis-
sioning, instruct users in the ventilation
unit and operating units.

2 Intended use

PP 45-/PPB 30 ventilation units with heat
recovery are used for air extraction/ventilation
of flats, offices and similar rooms. They are
suitable for new builds and renovation work.
The units are designed for 24h operation. The
residential unit's ventilation system should be
configured in accordance with DIN 1946-6.
PP 45 are ventilation units, which are gener-
ally only suited to use in supply air rooms.
To achieve efficient ventilation of PP 45 units,
we would recommend operating the PP 45
in pairs with alternating ventilation and air
extraction.
PPB 30 are balanced ventilation units, which
are the ideal choice for use in exhaust air
rooms (bathroom, WC or kitchen with win-
dows) and aerate and ventilate the rooms at
the same time. Exhaust air mode is started
automatically depending on the setting or can
be started manually at the touch of a button.
PPB 30 are stand-alone units or can be used
in groups with other PPB 30/PP 45 units.
PPB30 units have degree of protection IPX4.
The protection zone must be determined
depending on the unit variant used.
PP 45 are fitted in external walls (wall thick-
ness 265-790 mm), PPB 30 in external walls
(wall thickness 320-790 mm). The electrical
connection is made to a permanent electrical
installation.
For PP 45 and PPB 30, the following unit
variants are available: Object "O", Comfort
"K" and the radio version "RC". The units are
operated using an RLS../DS.. room air control
suitable for the unit variant:
PP 45 O, PP 45 K and PPB 30 O are operat-
ed with an RLS 45 O or RLS 45 K control.
PPB 30 K are operated with an RLS 45 K
control.
37