Maico PP 45 O Installations- Und Inbetriebnahmeanleitung Seite 36

UK | Installation and commissioning instructions for PP 45/PPB 30
UK
Installation and commissioning
UK
instructions for PP 45/PPB 30
ventilation systems
These installation and commissioning instruc-
tions contain important information regarding
the installation of ventilation components,
commissioning and the many different setting
options of the ventilation system.
Here you can find information regarding con-
nections to the bus system or at the 230 V
input of the RLS 45 K control.
In combination with an RLS 45 K control, you
can also use the commissioning software.
Further information regarding installation and
the settings menus can be found in chapter
14. The free software can be found on the in-
ternet at www.maico-ventilatoren.com or can
be called up with the following QR code.
Please read these instructions carefully. Fol-
low the instructions. Pay particular attention
to the safety instructions.
Before commissioning, also read the final as-
sembly kit instructions as well as the operating
instructions enclosed with the ventilation units.
Where can I find what?
● For information regarding the installation
of the wall sleeve and of external instal-
lations  PP 45-/PPB 30 shell mounting
instructions.
● For information regarding standard
installation of the ventilation units
and controls  PP 45 or PPB 30
final assembly kit instructions.
● For information regarding operation and
function  PP 45-/PPB 30 operating
instructions.
● For information regarding unit settings
via the service mode  PP 45-/PPB 30
operating instructions.
● For the installation of accessories 
Accessories supplement.
36
Table of Contents
1 Specialist installer qualifications ........37
2 Intended use ..........................................37
3 Safety instructions and warnings .......38
4 Requirements at the installation site ..41
5 Technical data .......................................42
5.1 Technical data for PP 45 .....................42
5.2 Technical data for PPB 30 ..................42
6 Connection options ..............................43
6.1 RLS 45 K combinations K1 - K18 .......43
6.2 RLS 45 O combinations K20 - K27 .....44
6.3 PP 45 RC combination K30
(EnOcean wireless) ............................44
7 System features ....................................45
7.1 PP 45 O/K/RC.....................................45
7.2 PPB 30 O ............................................45
7.3 PPB 30 K/RC ......................................46
7.4 Wired room air control RLS 45 O /
RLS 45 K ............................................46
7.5 Radio system from PP 45 RC/
PPB 30 RC units .................................46
7.6 Service mode ......................................46
7.7 Sensors ..............................................47
7.8 Power units PP 45 LT /
RLS 45 O/K controls ...........................47
7.9 The 230 V input of the RLS 45 K ........47
7.10 Modbus interface (building control
technology) .........................................47
8 System expansions - Connection of
further components ..............................48
8.1 Safety instructions 230 V connection .48
8.2 External sensors .................................49
8.3 Additional room air controls
(parallel operation) ..............................49
8.4 PP 45 EO EnOcean extension module ..50
8.5 PP 45 LT power unit ...........................50
8.6 Modbus interface (building control
technology connection) .......................50
Acknowledgements:
© Maico Elektroapparate-Fabrik GmbH. Transla-
tion of the original German instructions. We cannot
be held responsible for mistakes or printing errors
and retain the right to make technical modifications
without giving prior notice. The brands, brand names
and protected trade marks that are referred to in this
document refer to their owners or their products.