Slave Mode - Cameo THUNDERWASH 600 RGBW Bedienungsanleitung

SETTING STANDALONE MODE
Six different stand-alone operating modes are available. Press MODE to access the selection menu (System Settings). Using the UP and
DOWN buttons, select the menu item "Stand Alone" (dark background) and confirm with ENTER. Using the UP and DOWN buttons, select the
desired stand-alone mode and confirm with ENTER. Please refer to the editing options of the individual stand-alone modes in the following
table. Use UP and DOWN to select the desired parameter, ENTER to enable editing, UP and DOWN to change the relevant value, and ENTER
to confirm.
System Settings Stand Alone
DMX Address 001 Colour Macro
DMX Mode 7CH_2 Sound
Stand Alone User Colour

Slave Mode

Off/On Fade
Advanced Settings Jump
System Info Auto
SLAVE MODE
Press MODE to access the selection menu (System Settings). Using the UP and DOWN buttons, select the menu item "Slave Mode" (dark
background) and confirm with ENTER. The status field will display "On". Press MODE to return to the main display. After about 30 seconds
of inactivity, the main display is automatically activated and "SLAVE" is clearly shown in the centre of the display. Connect the slave and the
master units (same model and software) with a DMX cable and enable one of the stand-alone modes on the master unit. The slave unit will
now follow the master unit. As soon as you activate one of the other operating modes, the slave mode status field will automatically display
"Off". The control signal from the master unit is only transmitted if the main display is activated in the master unit. The main display must
also be activated on the slave unit.
System Settings Operating Mode
DMX Address 001
SLAVE
DMX Mode 7CH_2
Stand Alone
Slave Mode Off/On
Advanced Settings
System Info
Stand Alone
Colour Macro
00–99
Sound
(music control, colour = colour
macro)
User Colour
(individual colour blend + strobe)
Fade
(alpha blending)
Jump
(colour change)
Auto
(combination of
colour blending, colour change,
strobe)
Red, Amber, Yellow Warm, Yellow, Green,
Turquoise, Cyan, Blue, Lavender, Mauve,
Magenta, Pink, Warm White, White,
Cold White
Sensitivity = microphone sensitivity
Dimmer
Strobe (000–010 = no function,
011–255 = approx. 1–30 Hz)
Red
Green
Blue
White
Speed
Brightness
Speed
Brightness
Speed
Brightness
Red
–
Cold White
00–99
000–255
000–255
000–255
000–255
000–255
000–255
000–100
000–100
000–100
000–100
000–100
000–100
7