Operation - Cameo THUNDERWASH 600 RGBW Bedienungsanleitung

OPERATION

PLEASE NOTE
When the spotlight is connected to the mains, the CAMEO logo will appear in the display during the start-up process. After this process, the
spotlight is ready for operation and the previously selected mode will be activated.
CONFIGURE DMX START ADDRESS
Press MODE to access the selection menu (System Settings). Using the UP and DOWN buttons, select the menu item "DMX address" (dark
background) and confirm with ENTER. A number field is then displayed and you can configure the DMX start address as required with the UP
and DOWN keys (press and hold button for quick change in value, the highest value is dependent on the selected DMX mode). Confirm the
entry with ENTER and press MODE to return to the main display. The main display is activated automatically after approximately 30 seconds
of inactivity. The DMX start address is clearly visible in the middle of the display and the DMX mode is displayed on the bottom line.
System Settings
DMX Address 001
-
001
DMX Mode 7CH_2
Stand Alone
Slave Mode Off/On
Advanced Settings
System Info
DMX MODE SETTING
Press MODE to access the selection menu (System Settings). Using the UP and DOWN buttons, select the menu item "DMX Mode" (dark
background) and confirm with ENTER. A selection box is displayed and you can select the desired DMX mode with the help of the UP and
DOWN controls. Confirm the entry with ENTER and press MODE to return to the main display. The main display is activated automatically
after approximately 30 seconds of inactivity. The DMX start address is clearly visible in the middle of the display and the DMX mode is
displayed on the bottom line.
DMX control signals from a DMX controller will only be received and processed if the main display is activated on the spotlight.
System Settings 1CH
DMX Address 001 2CH_1
DMX Mode 7CH_2 2CH_2
Stand Alone 3CH_1
Slave Mode Off/On 4CH_1
Advanced Settings 4CH_2
System Info 7CH_1
7CH_2
6
512
Operating Mode
001
DMX Mode: 7CH_2