Slave Mode - Cameo DURA SPOT Bedienungsanleitung

SLAVE MODE

For the slave unit, select Slave in the main menu, confirm the selection, then select SLAVE and
confirm again. Connect the slave and master units (same model, same software version) via DMX,
configure the master unit as MASTER and activate one of the stand-alone operating modes in the
master unit. The slave unit will now follow the master unit.
SYSTEM SETTINGS (Settings)
Select Settings and confirm.
This will take you to the submenu for configuring the submenu items (see table):
Settings
Dimmer Curve = Dimmer Curve
Light intensity increases linearly with
Linear
DMX value
Light intensity can be finely adjusted at
Exponential lower DMX values and broadly adjusted
at higher DMX values
Light intensity can be broadly adjusted
Logarithmic at lower DMX values and finely adjust-
ed at higher DMX values
19