Herunterladen Inhalt Inhalt Diese Seite drucken

Electrolux GS55GLI201 Benutzerinformation Seite 97

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Caution! Do not damage nozzle
openings. Be careful when cleaning the
spray arms.
Ceiling spray arm
1. Turn the fixing screw ( A ) anticlockwise.
2. Pull the spray arm off the shaft.
3. Clean the spray arm nozzles and the fix-
ing screw.
4. Fasten the spray arm with the fixing screw
( A ) by turning it clockwise.
Upper basket spray arm
1. To remove the upper basket spray arm,
turn it laterally.
2. Clean the spray arms nozzles.
3. Replace the spray arm, press upwards
until it snaps into place.
Lower spray arm
1. Turn the fixing screw ( B ) anticlockwise.
2. Pull the spray arm off the shaft.
3. Clean the spray arms nozzles and the fix-
ing screw.
4. Fasten the spray arm with the fixing screw
( B ) by turning it clockwise.
External cleaning
Clean the external surfaces of the machine
and control panel with a damp soft cloth. If
necessary use only neutral detergents. Never
use abrasive products, scouring pads or sol-
vent (acetone, trichloroethylene etc... ).
Polished chromium steel and aluminium
look surfaces
Remove light dirt with a clean damp soft
cloth.
Microfibre cloths are recommended.
Do not use agents that scratch or scour.
If required, use a product for cleaning
chrome surfaces. Follow the manufacturer
instructions when using these products.
Caution! When cleaning do not go
against the direction of the stainless
steel finish (the fine horizontal lines).
No circular movements.
Internal cleaning
Ensure that the seals around the door, the
detergent and rinse aid dispensers are
cleaned regularly with a damp cloth.
We recommend every 3 months you run the
wash programme for heavy soiled dishes us-
ing detergent but without dishes.
Prolonged periods of non-operation
If you are not using the machine for a pro-
longed period of time you are advised to:
1. Unplug the appliance and then turn off
the water.
2. Leave the door ajar to prevent the forma-
tion of any unpleasant smells.
3. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location
where the temperature is below 0°C. If this is
unavoidable, empty the machine, close the
appliance door, disconnect the water inlet
pipe and empty it.
Moving the machine
If you have to move the machine (moving
house etc...):
1. Unplug it.
2. Turn the water tap off.
electrolux 97

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis