Inserting The Batteries - TE AT-30 Originalbetriebsanleitung

Electric Crimping Machine AT-300
6.2

Inserting the Batteries

INFORMATION
The electrical Crimping Machine AT-300 is not operable without inserted batteries or if the
+
batteries are empty.
Disconnect power supply.
+
Turn the battery compartments 1 under
+
the electric Crimping Machine AT-300 to
open them.
Insert the batteries (2 x 2 x 1,5 V Baby
+
Cells Type C) one after another with the
negative pole pointing to the top.
Close battery compartments 1 by turning
+
them.
If the wrong batteries are inserted or if they
are inserted in the wrong way, the following
error prompt appears:
If the batteries are empty, the following error
prompt appears:
048111000x03
048111000x04
Seite / Page 62 / 85
IS412-94328 Rev. B
1
Fig. 6.4
Fig. 6.5