Operating Elements; Touch Display - TE AT-30 Originalbetriebsanleitung

Electric Crimping Machine AT-300
4.4

Operating Elements

4.4.1

Touch Display

The touch display 1 (Fig. 4.3) is activated, deactivated or shifted to the set-up menu by the
key switch. The operation of the touch display is intuitively by self-explanatory icons, which
can partly be selected.
Symbol
Service
Explanation
On
Off
Set-up Mode
Normal Operation 360° , press once = complete cycle
Double Step Mode
Step 01-10, press twice = complete cycle
Reset Counter
Manual Motor Movement forwards
Manual Motor Movement backwards
Calibration Touch Display
Confirm Button
Cancel Button
Error Prompt Indication
Insert Wire
Service
Seite / Page 54 / 85
IS412-94328 Rev. B
Selectable
NO
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
NO
YES
PIN lock