Safety; Warning & Safety Precautions In This Operating Instruction; Safety Precautions - TE AT-30 Originalbetriebsanleitung

Electric Crimping Machine AT-300
2

Safety

2.1 Warning & Safety Precautions in this Operating Instruction
The following warnings and safety related cautionary notices in the individual chapters alert
you to various levels of danger:
DANGER
Identifies dangerous voltage and live parts, which will lead to serious injuries or even
+
death when touching it.
DANGER
Identifies an imminent, serious danger, which, if it is not avoided, will lead to serious
+
injuries or even to death.
CAUTION
Identifies a possible danger, which, if it is not avoided, will lead to serious injuries or even
+
to death.
ATTENTION
Identifies a potential dangerous situation, which, if it is not avoided, can lead to medium
+
or minor injuries or material damages.
INFORMATION
If this information is not followed, it can lead to a deterioration of the operating procedure.
+
2.2

Safety Precautions

The electric Crimping Machine AT-300 has been constructed according to state-of-the-art
technology and the acknowledged technical safety regulations.
When carrying out jobs such as installation, putting the machine into operation or setting it up,
operation, changing the conditions of use and the mode of operation or carrying out
maintenance and service jobs, it is important to observe the procedures for switching off the
machine described in the operation instruction.
Please observe the national regulations according to the minimum age of the personnel
operating the electric Crimping Machine AT-300. Allowing younger persons access to the
machine is strictly prohibited.
Do not operate the electric Crimping Machine AT-300 before having read and understood
+
all operating instructions.
The operating instruction must be constantly within reach of the electric Crimping Machine
+
AT-300. Every machine operator must have read and understood this operating instruction.
The safety instructions, warnings and precautions contained in the individual chapters must
be strictly observed by all users and operators when working on or with the electric
Crimping Machine AT-300.
To lift the crimping machine use the handle recesses on the machine.
+
Wear suitable safety shoes when transporting machine.
+
Position the electric Crimping Machine AT-300 on a flat surface and assure the stability of
+
the machine. Ensure that the table or bench is stable enough to support the machine in
normal use.
Assure an appropriate table height. The table height is dependent on the position of the
+
operator, (work in sitting or standing position) according to prEN 894-4:2004, Table A.1.
Seite / Page 48 / 85
IS412-94328 Rev. B