Connecting To Power Supply - TE AT-30 Originalbetriebsanleitung

Electric Crimping Machine AT-300
6.1

Connecting to Power Supply

CAUTION
Select the right voltage with voltage selector 6 (Fig. 6.1).
+
The machine can only be made currentless by disconnecting the main plug connection 4
+
(Fig. 6.1) from the power supply.
INFORMATION
Use a power supply cable with a main plug of your norm (with protective contact).
+
Connect the foot pedal connecting cable 1
with foot pedal socket 2 on the machine and
secure it by slightly twisting it to the right (Fig.
6.1/6.2).
A power cable EU as well as a power cable
US are included within the scope of delivery.
Choose the power cable with a main plug of
your norm and connect it with the 3 pole main
plug connection 4 on the machine (Fig. 6.1).
Move the voltage selector 6 to the right
voltage (115 V or 230 V).
If the supply voltage is too high, the following
error
048111000x01
If the supply voltage is too low, the following
error prompt appears:
048111000x02
Move ON/OFF switch 5 to position I
(Fig. 6.1/6.3).
Move key switch 3 to position II „EIN/ON"
(normal working condition) (Fig. 6.1).
The display shows the following icon:
The crimping machine is now ready for use.
prompt appears:
Seite / Page 61 / 85
IS412-94328 Rev. B
6 5 4 3 2
Fig. 6.1
7
Fig. 6.2
5
Fig. 6.3
1