Foot Pedal - TE AT-30 Originalbetriebsanleitung

Electric Crimping Machine AT-300
4.4.7

Foot Pedal

The foot pedal is equipped with a safety lock
1, which prevents operation of the machine
when the foot pedal has been completely
floored. The arrow of the safety lock will rotate
to the 3 o' clock position (Fig. 4.17) and the
machine will not function. To reset the safety
lock, rotate it counter-clockwise to the 12
o'clock position (Fig. 4.18). Now the machine
is ready for operation again!
Safety lock open
INFORMATION
Over-pressing the foot pedal will trip the safety lock. It will rotate to the 3 o' clock position
+
and the machine will not function. To reset the safety lock, rotate it counter-clockwise to
the 12 o' clock position.
Please note, that the foot pedal must be held-down constantly to ensure a complete
+
working cycle!
If you release the safety button on the machine or the foot pedal, the crimping process will
+
be interrupted. If you press the safety button of the machine and the foot pedal again
simultaneously, the crimping process will be continued until its completion.
Fig. 4.18
Seite / Page 58 / 85
IS412-94328 Rev. B
1
Safety lock locked
Fig. 4.16
Fig. 4.17