Removal - SCHUNK KSC-F 80 Montage- Und Betriebsanleitung

_________________________________________________________________________________________

6.1 Removal

KSC-F 80
 Removing system jaws.
 Pull the spindle assembly slightly out.
 Remove the cylinder screw. (pos. 80)
KSC-F 125/160
 Removing system jaws.
 Remove the securing screws. (pos. 80 and pos. 90)
 Pull the spindle assembly from the tool body.
schunk.com XND.00030.002_B – 10/2018
Figure: KSC-F 125
33