SCHUNK KSC-F 80 Montage- Und Betriebsanleitung Seite 29

_________________________________________________________________________________________
KSC-F 160
The following interfaces are included in the basic variant:
2 x Ø12 H7 positioning bores for alignment of the vice.
4 x Ø12 F7 positioning bores and 4 x Ø13 fixing bores used to position and attach the vice
with Ø12 f7/M12 fitting screws or M12 cylinder screws on grid plates with a size 50 grid and
on T-slot tables.
2 x Ø25 H6 alignment holes for VERO-S quick-change palleting system.
Longitudinal grooves on the sides to attach clamping claws.
Alignment with 20 H7 driving slot in tool body, using precision sliding blocks on machine
table.
The KSC-F can also be prouced at the factory with customer-specific positioning and
fixing holes as well as with location recesses for various commonly available zero point
clamping systems.
schunk.com XND.00030.002_B – 10/2018 29