Servicing, Cleaning, Maintenance; General Cleaning / Lubrication; Troubleshooting, Eliminating Faults; Removal - SCHUNK KSC 80-Serie Montage- Und Betriebsanleitung

_________________________________________________________________________________________
5

Servicing, cleaning, maintenance

A special servicing is not required, because the spindle unit is protected by the carriage
construction.

5.1 General cleaning / lubrication

Clean and oil the running surfaces and guides of the vice regularly, e.g. with MOTOREX
Supergliss 68 K to ISO VG 68.
6

Troubleshooting, eliminating faults

Vice is hard to operate:
Remove the system jaws, clean the vice and damaged surfaces must be carefully levelled off
with a honing stone.
If this does not result in an improvement of the function, the vice can be further dismantled in
accordance with the description below.

6.1 Removal

schunk.com
All manuals and user guides at all-guides.com
XND.00022.002_B – 10/2018
 Remove the V-Circlip (pos. 050) from
the spindle (pos. 020).
 Move the carriages (pos. 030 and
pos. 040) from the tool body (pos. 010)
by turning to the left to fully remove the
spindle from the carriages.
 Clean the system completely,
and reassemble.
23