SCHUNK KSC-F 80 Montage- Und Betriebsanleitung Seite 28

_________________________________________________________________________________________
KSC-F 125
The following interfaces are included in the basic variant:
2 x Ø12 H7 positioning bores for alignment of the vice.
3 x Ø13 fixing bores in a distance of 150 mm for cylinder screws M12.
4 x Ø 12 F7 positioning bores and 2 x Ø13 fixing bores (distance 50), used to position and
attach the vice with Ø12 f7/M12 fitting screws or cylinder screws M12 on grid plates with a
size 50 grid and T-slot tables.
2 x Ø25 H6 alignment holes for VERO-S quick-change palleting system.
Longitudinal grooves on the sides to attach clamping claws.
schunk.com XND.00030.002_B – 10/2018 28