Activating The Temperature Alarm - Auriol HG02832A Bedienungs- Und Sicherheitshinweise

Activating the temperature alarm

Press and hold the ALERT button for three seconds until the
14
temperature display flashes in the outdoor temperature field .
23
A flashing up arrow will appear to the left of the temperature.
Now press the UP button or the DOWN- / button to set
8 9
the maximum temperature for the desired temperature range.
TIP: Press and hold the UP button or the DOWN- / button to
quickly scan ahead or back through the numbers.
Confirm the value by pressing the ALERT button. The temperature
display will now flash again and a down arrow will start
flashing.
Press the UP button or the DOWN- / button to now set the mini-
mum temperature for the desired temperature range.
Confirm the value by pressing the ALERT button.
The temperature range is now set.
Briefly press the ALERT button to now activate or deactivate the
temperature alarm.
With the temperature alarm activated a static double arrow will
appear in the outdoor temperature field below OUT:
If the outdoor sensor measures a temperature outside this temper-
ature range the main station will sound an alarm for one minute.
This alarm can be silenced by pressing any button on the keypad.
The temperature which triggered the alarm will flash as a visual
alarm, and the part of the double arrow indicating the direction of the
temperature deviation. Press the ALERT button to switch off the alarm.
22 GB