Functional Description; Putting Into Operation - Abicor Binzel ABITIG MT 500W Betriebsanleitung

5 Functional Description

4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to exclude
the risk of transport damage.
Goods inspection
In case of complaints
Packaging for returns
Tab. 8 Transport
4.2 Storage
Physical storage conditions in a closed environment:
 Tab. 2 Ambient conditions for shipment and storage on page EN-5
5 Functional Description
The TIG welding torch is part of a welding system. In combination with appropriate operating
resources, the arc is used for welding. In TIG welding, a tungsten electrode and an inert gas are
used. The molten pool and the arc are protected by the inert gas from atmospheric
interferences. The electrode holder or gas diffuser is used to transmit current to the tungsten
electrode. The ignition of the arc depends on the type of power supply and will therefore not
be described any further. The hose assembly serves as supply line and included the connection
elements.

6 Putting into operation

DANGER
Risk of injury due to unexpected start-up.
The following instructions must be adhered to for the entire duration of maintenance,
servicing, mounting, dismounting and repair work:
• Switch off the power source.
• Close the gas supply.
• Close off the coolant supply.
• Disconnect all electrical connections.
• Switch off the entire welding system.
EN - 8
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
If the delivery has been damaged during transportation, contact the last
carrier immediately. Retain the packaging for potential inspection by the
carrier.
Where possible, use the original packaging and the original packaging
material. If you have any questions about the packaging and/or how to
secure an item during shipment, please consult your supplier.
®
ABITIG MT
BAL.0107 • 2018-11-12