Functional Description - Abicor Binzel MFS-V2 Betriebsanleitung

MFS-V2
Checking procedure Make sure that the shipment is complete by referring to the delivery note!
on receipt of goods
In case of damage Check the package and components for damage (visual inspection)!
In case of complaints If the goods have been damaged during transport, contact the last carrier immediately. Keep the
packaging (for possible checks by the carrier).
Packaging for Use the original packaging and the original packaging material.
returning the goods
If you have questions concerning the packaging and safety during shipment, please consult your supplier.
Tab. 8 Transport
4.2 Storage
Physical storage conditions in a closed room:
 Tab. 2 Temperature on page EN-4

5 Functional Description

The wire feeding systems consists of MFS-V2 E-Box and M-Drive. The following components are included
in the master feeder system MF:
1 MF 1/2
2 Cable assembly with control
lead
M-Drive - MF 1/2
3 MFS-V2
Fig. 5 Configuration of the master feeder system MF
All elements are combined to form a functional unit.
5.1 E-Box
All electronic components are installed in the metal housing. The power supply is provided via a separate
connecting cable. For the connection voltage and power consumption, see
 2.3 Technical Data on page EN-4
5.2 M-Drive
The M-Drive is adapted electronically and mechanically to the master feeder system. All required valves and
connections have been installed in the housing.
1 2 3
A
11
D
C
10 9
4 Control lead
M-Drive - E-Box
5 Options
6 Control lead
process power supply - E-Box
4 5
M-Drive
B
E-Box
6
E
F
8 7
7 Control lead
process power supply - M-Drive
8 Process power supply
9 Control lead
robot control - E-Box
5 Functional Description
10 Robot control
11 Control lead
robot control - robot
EN - 7