Main Power And Energy Saver Key; How To Turn On The Main Power - Canon imageRUNNER ADVANCE C3330i Wartungsanleitung

Main Power and Energy Saver Key

This section describes how to use the main power switch and the Energy Saver key.

How to Turn ON the Main Power

Make sure that the power plug is firmly inserted into the
power outlet.
WARNING
Do not connect or disconnect the power cord with wet
hands, as this may result in electrical shock.
IMPORTANT
If you want to turn OFF the main power and then back
ON again, wait for at least 10 seconds after the main
power indicator is turned OFF before turning ON the
main power. However, when [Quick Startup Settings for
Main Power] is enabled, if you do not wait more than 20
seconds after the main power indicator is turned OFF,
quick startup is not performed.
01
Press the switch to the "I" side to turn
the main power ON.
The main power indicator on the control panel lights
when you turn ON the main power switch.
Various screens appear when system software is
loading.
62

Main Power and Energy Saver Key

3
1
2
If you are using a login service, log in using the
procedure for the login service you are using.
NOTE
You can change the default display that appears after
)
the machine is turned ON from [Default Screen after
Startup/Restoration] on the Settings/Registration
screen. (See e-Manual > Settings/Registration.)
If this machine is connected to a powered off
)
Macintosh computer by USB cable, the computer may
turn on automatically when this machine does. In this
case, disconnect the USB cable from the machine. You
may also be able to solve this problem by using a USB
hub between the machine and the computer.
The response of the buttons and keys may not be
)
optimal immediately after you turn ON the main
power of the machine.
If you set [Quick Startup Settings for Main Power] to
)
'On' in [Preferences] (Settings/Registration), the tone
sounds when turning ON the main power of the
machine. (Depending on the conditions, the machine
does not startup quickly and the tone does not
sound.)
Depending on the conditions under which the
)
machine is being used, the machine may not startup
quickly if you set [Quick Startup Settings for Main
Power] to 'On' . For more information, see e-Manual >
Settings/Registration.
For information on the method for logging in using
)
DepartmentID Management with the Copy Card
Reader-F1, see e-Manual > Optional Products/
Software.
For information on the method for logging in when
)
User Authentication is set, see the e-Manual.
For information on the method for logging in when
)
DepartmentID Management is set, see the e-Manual.