Canon imageRUNNER ADVANCE C3330i Wartungsanleitung Seite 44

04
Prepare the new staple cartridge.
1. Remove the (two) new staple cartridges from their
box.
2. Remove the black part on the end before inserting
the staple cartridge.
05
Insert the new staple cartridge in until
it clicks into place.
44
Replacing the Staple Cartridge in the Saddle Stitcher Unit (Booklet Finisher-U1)
IMPORTANT
When replacing the staple cartridges, replace both the
)
front and back staple cartridges.
Only one staple cartridge can be inserted at a time on
)
each side.
06
Push the saddle stitcher unit back into
its original position.
1. Pull the stapler unit of the saddle stitcher unit
towards you, and then push it down into its original
position.
2. Grip the handle of the saddle stitcher unit, and return
it to its original position.
1
2
CAUTION
When pushing the saddle stitcher unit back into its
original position, be careful not to get your fingers
caught, as this may result in personal injury.
07
Close the front cover of the finisher.
CAUTION
When closing the front cover of the finisher, be careful
not to get your fingers caught, as this may result in
personal injury.
NOTE
When you have replaced the staple case, be sure to
manually reposition the staples in the saddle stitcher
unit. For more information, see the e-Manual.