Network Environment (Software Specifications); Printer Settings (Software Specifications) - Canon imageRUNNER ADVANCE C3330i Wartungsanleitung

Network Environment
Item
Protocol Supported
Printer Settings
(Software Specifications)
Item
Operating Modes
Resident Fonts
Printable Area
(Software Specifications)
TCP/IP:
Frame type:
Ethernet II
Print applications:
LPD/Raw/IPP/IPPS/FTP/WSD/SMB
AppleTalk
Auto, PS, PCL, XPS, Imaging, and PDF
PCL:
93 Scalable fonts, 2 OCR fonts, and AndaleFont
Traditional Chinese)
PS:
136 Scalable fonts
When using the Direct Print (for PDF/XPS):
Japanese Fonts:
*2
2 Canon Heisei fonts
(Heisei Mincho W3/Heisei Kaku Gothic W5)
European Fonts:
*2
136 fonts
*1 The optional PCL International Font Set needs to be activated to use Andale® and WorldType® Collection, or
Andale Mono WT.
*2 These fonts are included for use with PDF files.
PCL5c and PCL6:
Reduced to 4.2 mm from the top, bottom, left, and right edges of the paper.
PostScript 3:
Reduced to 4 mm from the top, bottom, left, and right edges of the paper.
When printing in the Expand Print Region and Print mode, the upper margin becomes 4 mm, the
lower margin becomes 2.5 mm, and the side margins both become 2.5 mm. The printable area is
enlarged.
When an original has data that extends all the way to the edges, even if you select [Expand Print
Region and Print], the periphery of the data may be cut off when printing. In this case, specify the
reduction ratio in the printer driver so that data is not cut off, and perform printing again.
Specifications
Specifications
*1
(Japanese, Korean, Simplified Chinese, and
Specifications 83