Replacing The Staple Cartridge In The Saddle Stitcher Unit (Booklet Finisher-U1) - Canon imageRUNNER ADVANCE C3330i Wartungsanleitung

Replacing the Staple Cartridge in the Saddle Stitcher
Unit
(Booklet Finisher-U1)
When the saddle stitcher unit of the Booklet Finisher-U1 is almost out of staples and the staple cartridge
must be replaced, a screen prompting you to replace the staple cartridge appears on the touch panel display.
Follow the procedure described below to replace the staple cartridge.
IMPORTANT
If necessary, remove all output paper in the booklet tray before replacing the staple cartridge of the saddle stitcher unit.
NOTE
The Booklet Finisher-U1 is an optional product.
)
We recommend that you order staple cartridge from your local authorized Canon dealer before your stock runs out.
)
Use only staple cartridges intended for use with this machine.
)
01
Open the front cover of the finisher.
02
Pull out the saddle stitcher unit.
1. Grip the handle of the saddle stitcher unit, and pull out until it stops.
2. Pull the stapler unit of the saddle stitcher unit
towards you, and then push it up.
1
2

Replacing the Staple Cartridge in the Saddle Stitcher Unit (Booklet Finisher-U1)

03
Pull out the empty staple cartridge.
43