If The "Load Paper." Message Is Displayed - Canon imageRUNNER ADVANCE C3330i Wartungsanleitung

If the "Load paper." Message Is Displayed

Cause The paper source is out of paper.
Remedy Load paper in the paper source indicated on the touch panel display. For information on loading paper,
see "Loading Paper, " on p.36.
The position of the slide guides is not correct.
Cause
Remedy Adjust the slide guides to match the size of the paper. Paper may overlap when it is fed or a paper jam
may occur, depending on the cut surface of the paper. Changing the paper orientation and loading it
again may reduce the effect of the cut surface.
Paper Drawer 1
The paper settings do not match the paper that is
Cause
loaded.
Remedy Check the paper settings in [Consmbls./Others] in
[Status Monitor/Cancel]. If the paper settings do not
match the paper that is loaded, change the settings
so that they match.
NOTE
The paper loaded in the paper drawers and multi-
purpose tray can be set in
→ [Preferences] → [Paper Settings]. For more
information, see the e-Manual.
Cause The paper settings in the printer driver or application differ from the paper that is loaded.
Check the paper settings on the [Printing Preference] sheet of the printer driver, and match them with
Remedy
the paper that is loaded.
Paper Drawer 2, 3, and 4
(Settings/Registration)
If the "Load paper. " Message Is Displayed
Multi-Purpose Tray
Paper settings
23