Main Power And Energy Saver Key; How To Turn On The Main Power - Canon imageRUNNER ADVANCE 500i Handbuch Für Starter

Main Power and Energy Saver Key

This section describes how to use the main power switch and the Energy Saver key.

How to Turn ON the Main Power

This section explains how to turn ON the main power.
IMPORTANT
If you want to turn OFF the main power and then
back ON again, wait for at least 10 seconds after the
main power indicator is turned OFF before turning
ON the main power. However, when [Quick Startup
Settings for Main Power] is enabled, if you do not
wait more than 20 seconds after the main power
indicator is turned OFF, quick startup is not
performed.
01
Make sure that the power plug is firmly
inserted into the power outlet.
Do not connect or disconnect the power cord with
wet hands, as this may result in electrical shock .
02
Press the main power switch (located
on the left side of the machine) to the
"I" side.
The main power indicator on the control panel
lights when you turn ON the main power
switch.
Various screens appear when system software
is loading.
If you are using a login service, log in using the
procedure for the login service you are using.
24

Main Power and Energy Saver Key

NOTE
• You can change the default display that appears
after the machine is turned ON from [Default Screen
after Startup/Restoration] on the Settings/
Registration screen. (See e-Manual > Settings/
Registration.)
• If this machine is connected to a powered off
Macintosh computer by USB cable, the computer
may turn on automatically when this machine does.
In this case, disconnect the USB cable from the
machine. You may also be able to solve this problem
by using a USB hub between the machine and the
Macintosh.
• The response of the buttons and keys may not be
optimal immediately after you turn ON the main
power of the machine.
• If you set [Quick Startup Settings for Main Power] to
'On' in [Preferences] (Settings/Registration), the tone
sounds when turning ON the main power of the
machine. (Depending on the situations, the machine
does not startup quickly and the tone does not
sound.)
• Depending on the conditions under which the
machine is being used, the machine may not startup
quickly if you set [Quick Startup Settings for Main
Power] to 'On' . For more information, see e-Manual >
Settings/Registration.
• If you are using Department ID Management with
the Copy Card Reader-F1, see e-Manual > Optional
Products/Software.
• If you are using Department ID Management, see
e-Manual > Basic Operations.
• If you are using SSO-H, see e-Manual > Basic
Operations.